Call us today

Call us today

Tuesday, 15 November 2016

Mistake To Avoid When Cleaning Bath Tub







DON'T leave your soap and shampoo bottles on the floor of your bathtub or shower. Doing this can result in stains and cracks as the acid from these products can eat away at the lining of your tub, allowing bacteria to build up and eventually damage your tub.

DON'T use abrasive scrub pads, steel wool or hard tools when cleaning your tub or shower. These types of materials will wear out the coating on your tub and grout and can cause unwanted damage.

DON'T use abrasive products that are hard on your bathtub. Just like the abrasive pads and tools, the cleaning product can easily damage your tub. Some products I don't recommend using are Comet, Paint Thinner and Magic Erasers.

Do not try to clean the electrical parts of the walk in bath tub. These are protected by casings and do not need to be maintained. You should also avoid using oils in the tub, which may cause the floor to be slippery. Always use gentle cleaners rather than steel wool or other abrasive materials, which may scratch the tub permanently.

How to clean Bath tub-

Bath tubs provide comfort and convenience. You could relax and be lost with the sensation and relaxation it gives us. It is considered one of your stress-reducing activities. However, hot tub maintenance is not as easy as any other maintenance for common things. You should follow a certain process to make sure that you will be doing it right and you will be getting the most out of your money.

Proper maintenance of the hot bathtub cover will result to more efficient and longer use. However, what are the steps and tips on how to clean your hot bathtub cover? Remember that the cover will be the one to catch the dirt, falling leaves, and debris that could have fallen in your bath tubs.



Step one is to take a soft cloth; normally made of cotton, and a piece of mild soap. Do not use detergent soap in cleaning your hot tub cover. Wash the vinyl cover several times with the mild soap solution and do this step several times every month.One tip for the longer use of hot bathtub cover is to make sure that the water chemistry on the hot tub is balanced.

Excessive chemistry is corrosive and might form a build up in the cover. Once it is corrosive, it can eat your cover out and you might end up destroying your hot tub cover sooner than expected.Next step is to wipe out any chemical build-up using the mild soap solution. Make sure to make it a thorough clean to make sure that the chemical will not leave any damaging effect to the cover.

Making sure that the clean is thorough, you will have easy cleaning system the next time you clean the hot tub. At the same time, even if the chemical build-up has been there for a while, making it a thorough clean will result in lesser and manageable damage to the chemical components of your vinyl cover. It is always wise to ensure sure clean with the cover for future preference and maintenance.

If you enjoy soaking in your tub from time to time, you definitely want to make sure it's clean. After all, it's not very appealing to think about soaking in a grimy tub that is full of germs. While it's never very fun to clean out the tub, here are a few tips that you can use to make the cleaning a bit easier so you can bathe in a nice, clean tub.

First of all, you want to start by choosing a good cleaner for the bathtub. Some of the best cleaning options include Lysol, which really removes germs, and Scrubbin' Bubbles does a great job on tubs too. Just make sure your cleaner will sanitize the tub and get rid of soap scum and any mineral buildup.

Before you start cleaning, get some rubber gloves. Wear them to keep your hands protected against the chemicals you'll be using.

Spray your cleaner all over the tub and allow it to sit for a few minutes. This way it works on the scum and dirt for you and you don't have to work as hard to get it off. Use a sponge or cleaning cloth to scrub the tub.

Sometimes using a bit of bleach can help you clean the tub and shower walls, but you don't want to go over board here.



Make sure you rinse out the tub when you are done scrubbing it. You don't want to end up getting the chemicals on your body when you take a bath in the bathtub later on. From time to time, it may be a good idea to put some drain care products down the drain of the tub too to help make sure the drain gets cleaned out good.

Bath tubs should be cleaned at least once a week. Fiberglass is a bit more porous than acrylic, which means that soap scum and grime may accumulate more quickly. Homeowners should use gentle cleaners that are appropriate for their specific tubs, and the tub's manual should help identify the proper cleaning materials. Baking soda and vinegar are natural alternatives that are gentle and won't scratch the tub. If stubborn rings or soap residue appear around the tub, then you should fill it with warm water before adding bleach and automatic dishwashing soap.

Allow the jets to run for 15 minutes before draining the tub. Fill it with warm water again, and allow the jets to run for another 15 minutes to remove any soap and residue that may still remain in the plumbing. After draining the tub a second time, use a damp cloth to wipe away any remaining residue. If the chrome looks dingy, wipe it with some white vinegar and salt to remove water deposits and make the chrome shiny.

Perform this simple cleaning task once a week in order to keep your tub looking clean. It will also keep your jets clear so that they continue to run properly, which will also make your tub last longer.